chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Communications Control Module > < Antenna Control Module|Service and Repair
Page 2
background image

Tighten the bolt to 9 N.m (80 lb in).

3. Connect the antenna cable to the module (3), if disconnected.
4. Connect the connector (2) to the rear quarter glass panel (1).

5. Install the cable (2, 3) to the roof cross member by pushing in the retainer clips (1).

6. Install the module bolt.

Tighten the bolt to 9 N.m (80 lb in).

7. Connect the antenna cable to the module (1).
8. Connect the connector (2) to the rear quarter glass panel (3).
9. Install the headliner.

Communications Control Module > < Antenna Control Module|Service and Repair