Avalanche 2500 4WD V8-8.1L VIN G (2003)
4. Install the nut to the threaded end of the intermediate cable.
-
Tighten the nut to 3.5 N.m (31 lb in).
5. Remove the safety stands.
6. Lower the vehicle.
7. Adjust the park brake system. Refer toPark Brake Adjustment .
Front
Park Brake Cable Replacement - Front
Removal Procedure
1. Release the park brake.
2. Remove the park brake pedal. Refer toPark Brake Pedal Assembly Replacement.
3. Roll the carpet back to access cable grommet.
4. Raise and support the vehicle. Refer toLifting and Jacking the Vehicle in General Information.