Avalanche 2500 4WD V8-8.1L VIN G (2003)
![background image](/chevrolet/avalanche_2500_4wd/v8-8.1l_vin_g/Page-861004.png)
5. Connect the ECT sensor electrical connector (3).
6. Connect the ignition coil harness electrical connector (2).
7. Install the CPA retainer to the ignition coil electrical connector (2).
8. Install the air cleaner outlet duct.
9. Tighten the clamps at the throttle body and air cleaner.
Tighten the clamps to 4 Nm (35 inch lbs.).
10. Install the engine sight shield.