Avalanche 2500 4WD V8-8.1L VIN G (2003)
Fuel Filler Hose: Service and Repair
REMOVAL PROCEDURE
1. Remove the fuel fill cap.
2. If necessary, drain the fuel to a level below the fuel fill hose. Refer to Fuel Tank Draining Procedure (Front Tank)Fuel Tank Draining Procedure
(Rear Tank).
3. Remove the fuel filler housing to body screws (1) and retainer (2).
4. Remove the fuel tank filler housing to fuel tank fill pipe screws.
5. Remove the fuel tank filler housing from the vehicle.
6. Raise and suitably support the vehicle. Refer to Vehicle Lifting.