Avalanche 2500 4WD V8-8.1L VIN G (2003)
![background image](/chevrolet/avalanche_2500_4wd/v8-8.1l_vin_g/Page-2016002.png)
1. Install the speed sensor with a NEW O-ring seal.
Tighten the sensor to 17 Nm (113 ft. lbs.).
2. Connect the speed sensor electrical connector (1).
3. Install the transfer case shield, if equipped.
1. Install the speed sensor with a NEW O-ring seal.
Tighten the sensor to 17 Nm (113 ft. lbs.).
2. Connect the speed sensor electrical connector (1).
3. Install the transfer case shield, if equipped.