Aveo L4-1.6L (2008)
1. Install the control module/receiver on its mounting bracket.
2. Connect the control module/receiver electrical connector.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the knee bolster with bolts.
Tighten the driver's side knee bolster mounting bolts to 10 N m (89 lb in).
4. Install the instrument panel under cover.
5. Connect the hood release cable to the hood latch release handle.
6. Install the screws.
7. Connect the negative battery cable.
8. Complete remote keyless transmitter programmming. Refer to Transmitter Programming (See: Testing and Inspection/Programming and
Relearning)
