Aveo L4-1.6L (2008)
Lamp Control Module: Service and Repair
Lamp Control Module Replacement
Replacement Procedure
Caution: Refer to Battery Disconnect Caution (See: Starting and Charging/Battery/Service Precautions/Technician Safety Information/Battery
Disconnect Caution).
1. Disconnect the negative battery cable.
2. Remove the instrument panel low cover.
3. Remove the screws and the lamp control module.
4. Disconnect the electrical connector.
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
1. Install the lamp control module with the screws.
2. Connect the electrical connector.
3. Install the instrument panel low cover.
4. Connect the negative battery cable.