Aveo L4-1.6L (2008)
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
1. Install the CMP sensor and bolt.
Tighten the CMP sensor bolts to 7 N.m (62 lb in).
2. Install the timing bolt front cover. Refer to Timing Belt Replacement (See: Engine, Cooling and Exhaust/Engine/Timing Components/Timing
Belt/Service and Repair).
3. Connect the CMP sensor electrical connector.
4. Install the engine cover.
5. Connect the negative battery cable.