Aveo L4-1.6L (2008)
8. Install the new generator shackle bracket (4) to the engine.
1. Install the nuts and the washers holding the generator shackle bracket to the engine (3).
Tighten
Tighten the generator shackle bracket nuts to 25 Nm(18 lb ft).
2. Install the generator shackle bracket bolt by hand (2). Use a pry bar (1 ) and lightly pry against the generator to align and start the bolt by hand.
Tighten
Tighten the generator shackle bracket bolt to 25 Nm(18 lb ft).
3. Install the power steering hose clamp and nut to the generator shackle bracket bolt (2).
Tighten
Tighten the nut to the generator shackle bracket bolt to 10 Nm(89 lb ft).
9. Install the discarded throttle body nuts to an intake manifold stud bolt and tighten both nuts together (1).
Once the nuts are jammed together, turn counterclockwise to remove the stud bolt. Repeat this process for the other stud bolts. Discard all
removed stud bolts.
10. Unscrew the PCV valve from the cam cover and discard (1).
