chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Inflatable Restraint Front End Sensor Replacement|Page 7830 > < Inflatable Restraint Front End Sensor Replacement|Page 7828
Page 1
background image

Impact Sensor: Service and Repair
Inflatable Restraint Side Impact Sensor Replacement

Inflatable Restraint Side Impact Sensor Replacement

Removal Procedure

Caution: Refer to Sensing and Diagnostic Module Voltage after Ignition is Turned Off Caution (See: Service Precautions/Technician Safety
Information/Sensing and Diagnostic Module Voltage after Ignition is Turned Off Caution).
Caution: Refer to Battery Disconnect Caution (See: Starting and Charging/Battery/Service Precautions/Technician Safety Information/Battery
Disconnect Caution).

1. Disconnect the negative battery cable.
2. Remove the lower trim from the center pillar. Refer to Center Pillar Lower Trim Panel Replacement (Notchback) (See: Body and Frame/Interior

Moulding / Trim/Trim Panel/Service and Repair)Center Pillar Lower Trim Panel Replacement (Hatchback) (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair).

3. Disconnect the side air bag sensor connector (2).
4. Remove the side air bag sensor mounting bolt.
5. Remove the side air bag sensor (1).

Installation Procedure

Inflatable Restraint Front End Sensor Replacement|Page 7830 > < Inflatable Restraint Front End Sensor Replacement|Page 7828