Aveo L4-1.6L (2008)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor Replacement
Front Wheel Speed Sensor Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution (See: Starting and Charging/Battery/Service Precautions/Technician Safety Information/Battery
Disconnect Caution).
1. Disconnect the negative battery cable.
2. Disconnect the front wheel speed sensor electrical connector.
Notice: Refer to Vehicle Lifting and Jacking Notice (See: Maintenance/Vehicle Lifting/Service Precautions/Vehicle Damage Warnings).
3. Raise and suitably support the vehicle.
4. Remove the bolt and the front wheel speed sensor from the steering knuckle.
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
1. Install the bolt and front wheel speed sensor to the steering knuckle.
Tighten the bolt to 9 N.m (80 lb in).
2. Lower the vehicle.
3. Connect the front wheel speed sensor electrical connector.
4. Connect the negative battery cable.