Aveo L4-1.6L (2008)
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
1. Install the outer tie rod with the lock nuts.
Tighten the lock nuts to 54 N.m (40 lb ft).
2. Install the outer tie rod with the hex nut.
Tighten the hex nut to 45 N.m (33 lb ft).
3. Inspect the vehicle. Refer to Preliminary Alignment Inspection (See: Alignment/Testing and Inspection) and Straight Ahead Inspection (See:
Service and Repair/Removal and Replacement).
4. Measure the wheel alignment.
5. If necessary, adjust the front toe. Refer to Front Toe Adjustment (See: Alignment/Service and Repair).
