Aveo L4-1.6L (2008)
2. Apply the correct seal per gage size of the wire.
For Weather Pack(R) terminals, slide the seal back along the wire in order to enable insulation removal.
3. Remove the insulation.
4. For Weather Pack(R) terminals only, align the seal with the end of the cable insulation.
5. Position the strip in the terminal.
For Weather Pack(R) terminals, position the strip and seal in the terminal.
6. Hand crimp the core wings.
7. Hand crimp the insulation wings.
For Weather Pack(R) terminals, hand crimp the insulation wings around the seal and the cable.
8. Solder all of the hand crimp terminals excepting Micro-Pack 100 World terminals. Soldering Micro-Pack 100 World terminals may damage the
terminal.
Sumitomo Connectors
Sumitomo Connectors
Tools Required
J-38125 Terminal Repair Kit
Terminal Removal Procedure
1. Slide the lever lock forward while pressing down on the lever lock release tab.