Beretta L4-138 2.3L DOHC QUAD 4 HO MFI VIN A (1994)
NOTICE: Care must be exercised to prevent drive axle joints from being over-extended. When either end of the shaft is disconnected, over-extension
of the joint could result in separation of internal components and possible joint breakage. Failure to observe this can result in interior joint or seal
damage and possible joint breakage.
6. Ball joint from knuckle using J 29330.
NOTICE: Use only the recommended tool for separating the ball joint from knuckle. Failure to use the recommended tool may cause damage to the
ball joint and seal.
7. Bolts attaching suspension support to vehicle.
8. Bolts attaching control arm to suspension support.