Blazer 2WD V6-4.3L VIN X (2004)
Blower Motor Relay: Service and Repair
BLOWER MOTOR RELAY REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions. See: Heating and Air Conditioning/Service Precautions/Technician Safety
Information/Battery Disconnect Caution
2. Remove the blower motor relay (1) from the retaining bracket.
3. Disconnect the electrical connector.
4. Remove the blower motor relay.
INSTALLATION PROCEDURE
1. Install the blower motor relay.
2. Connect the electrical connector.
3. Install the blower motor relay (1) to the retaining bracket.
4. Connect the negative battery cable.