Blazer 4WD V6-4.3L VIN X (2005)
3. Install the valve rocker arm cover onto the cylinder head.
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the valve rocker arm cover bolts.
^
Tighten the valve rocker arm cover bolts to 12 Nm (106 inch lbs.).
5. Position the engine wiring harness.
6. Connect the CKP sensor electrical connector (2).
7. Install the engine wiring harness and the bolt (3) to the generator mounting bracket.
^
Tighten the engine wiring harness bolt to 25 Nm (18 ft. lbs.).