Blazer 4WD V6-4.3L VIN X (2005)
5. Disconnect the accelerator cable (1) from the bracket clip (2).
6. Remove the left closeout/insulator panel.
7. Remove the accelerator cable from the accelerator pedal.
8. Remove the accelerator cable panel insulator retainer (2) from the accelerator cable (1).
9. Squeeze the accelerator cable tangs (3) and push the cable through the bulkhead (4).
10. Remove the accelerator cable.
INSTALLATION PROCEDURE
1. Install the accelerator cable (1) through the bulkhead (4).
2. Install the accelerator cable panel insulator retainer (2) on the accelerator cable (1).
3. Install the accelerator cable to the accelerator pedal (2).