Blazer 4WD V6-4.3L VIN X (2005)
Power Mirror Switch: Service and Repair
Power Mirror Switch Replacement
POWER MIRROR SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Carefully use a flat-bladed tool in order to release the outside mirror switch retaining tabs from the trim panel.
2. Remove the outside mirror switch from the trim panel.
3. Disconnect the electrical connector from the power folding mirror switch.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the power folding mirror switch.
2. Position the power folding mirror switch to the door trim panel.
3. Apply downward pressure to the power folding mirror switch, ensuring the retaining tabs are fully seated.
