C 1500 Suburban 2WD V8-4.8L VIN V (2002)
Seat Heater: Service and Repair
Seat Back Heater Element Replacement - Front
REMOVAL PROCEDURE
For the Escalade model, the seat back heater is sewn into the seat back cover. Refer to Seat Back Cover and Pad Replacement - Front in order to
replace the seat back cover. For all other models, refer to the procedure below.
1. Remove the seat from the vehicle.
2. Remove the seat back trim cover.
3. Peel the seat back heater off the foam pad.
4. Disconnect the seat back heater harness.
INSTALLATION PROCEDURE
1. Connect the seat back heater harness.
2. Install the seat back heater.
3. Install the seat back trim cover.
4. Install the seat in the vehicle.
