C 1500 Suburban 2WD V8-4.8L VIN V (2002)
Important: Failure to properly install the retaining clip could cause the cooler line to come loose and cause damage to the engine.
6. Install the NEW retaining clip into the quick connect fitting by using your thumb and forefinger. Insert the new retaining clip into one of the three
fitting recesses. Ensure that the retaining clip is engaged in all 3 slots.
7. With one end of the retaining clip engaged in the connector fitting slot, use your thumb in order to rotate the retaining clip around the connector
fitting, until the retaining clip snaps into place.
8. Ensure that the 3 retaining clip ears are seen from inside the fitting and that the retaining clip moves freely in the fitting slots.
9. Install a new retaining clip into the remaining quick connect fitting.
10. If equipped with a 6.01L engine, perform the following:
10.1.
Install the oil cooler hoses to the hose clip on the fan shroud.
10.2.
Snap the oil cooler hose clip shut.
