C 1500 Suburban 2WD V8-4.8L VIN V (2002)
10. Remove the exhaust manifold bolts, manifold, and gasket.
11. Discard the gasket.
12. Remove the heat shield bolts (1), and shield (2) from the exhaust manifold (1), if necessary.
13. Clean and inspect the exhaust manifold. Refer to Exhaust Manifold Cleaning and Inspection in Engine Mechanical - 4.81L, 5.31L, and 6.01- Unit
Repair.
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the heat shield (2), and bolts (1) to the exhaust manifold (1), if necessary.
-
Tighten the bolts to 9 Nm (80 inch lbs.).
