chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

HVAC System - Automatic|Page 10477 > < HVAC System - Automatic|Page 10475
Page 6
background image

-

Line up the heater/defroster lever with the mode actuator cam slot.

-

Line up the A/C lever with the mode actuator cam.

NOTE:  Refer to Fastener Notice in Service Precautions.

2. Install the mode actuator mounting screw to the HVAC module.

Tighten
Tighten the screw to 1.6 N.m (14 lb in).

3. Connect the electrical connection at the mode actuator (10).

4. Install the floor air outlet duct extension (1) to the floor air duct (2).

Mode Actuator Replacement - Auxiliary

REMOVAL PROCEDURE

HVAC System - Automatic|Page 10477 > < HVAC System - Automatic|Page 10475