chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Air Flow Control Box - Heater|Page 10849 > < Air Flow Control Box - Heater|Page 10847
Page 5
background image

5. Install the lower auxiliary air outlet (5).
6. Install the fastener (4)

7. Install the upper auxiliary air duct (6) to the air distributor duct (3).
8. Install the fastener (5)
9. Connect the electrical connectors to the auxiliary HVAC module.

10. Install the electronic suspension control module.
11. Install the right rear quarter trim panel.
12. Raise the vehicle.

NOTE:  Refer to Fastener Notice in Service Precautions.

Air Flow Control Box - Heater|Page 10849 > < Air Flow Control Box - Heater|Page 10847