C 1500 Suburban 2WD V8-4.8L VIN V (2002)
Power Steering Fluid Cooler: Service and Repair
Without Hydroboost
Power Steering Cooler Pipe/Hose Replacement (Without Hydroboost)
Removal Procedure
1. Remove the front grille.
Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
2. Remove the clamp retaining the power steering outlet hose (3) from the power steering gear (4).
3. Remove the clamp retaining the power steering inlet hose from the power steering pump (5).
4. Remove the bolts (2) retaining the power steering cooler from the radiator support.
5. Remove the power steering cooler from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the power steering cooler (1) to the vehicle.
Tighten the power steering cooler retaining bolts to 5 Nm (44 inch lbs.).
