C 1500 Suburban 2WD V8-4.8L VIN V (2002)
Important: Avoid unnecessary twisting/bending of the range selector cable when removing the cable from the support.
17. Remove the range selector cable from the support.
18. Remove the cable grommet from the floor panel.
19. Raise the vehicle. Refer to Vehicle Lifting.
20. Remove the two clips on the cable from the floor panel reinforcement.
21. Remove the cable from the clips on the transfer case, if equipped.
22. Remove the front half (column end) of the range selector cable assembly from the vehicle.
Installation Procedure
