C 1500 Suburban 2WD V8-4.8L VIN V (2002)
Back Window Glass: Service and Repair
Rear Window Replacement
Rear Window Replacement
Tools Required
*
J 24402-A Glass Sealant Cold Knife Remover
*
J 39032 Stationary Glass Removal Tool
*
J 34940 Rivet Gun
*
Urethane Adhesive Kit GM P/N 12346392 or Equivalent
*
Isopropyl Alcohol or Equivalent
*
Cartridge-type Caulking Gun
*
Commercial-type Utility Knife
*
Razor Blade Scraper
*
Suction Cups
*
Plastic Paddle
Removal Procedure
Caution: Refer to Glass and Sheet Metal Handling Caution in Service Precautions.
Important: Before cutting out a window, apply a double layer of masking tape around the perimeter of the painted surfaces and the
interior trim.
1. Remove the window garnish molding from the door frame.
2. Disconnect the electrical connector from the window defogger, if equipped.
Caution: Refer to Cracked Window Caution in Service Precautions.
Important: Keep the cutting edge of the tool against the rear window. This will allow the urethane adhesive to be separated from the
window.
3. Use J 24402-A, J 39032, or equivalent in order to remove the rear window.
*
Leave a base of urethane on the pinchweld flange.
*
The only suitable lubrication is clear water.
