C 1500 Suburban 2WD V8-6.5L DSL Turbo VIN F (1997)
-
If replacing hose, remove retainer from hose and reinsert in connector.
-
If reusing hose and connector, retainer can remain in place on hose.
Install or Connect
1. Push hose into connector until retainer tabs lock.
-
Pull back on hose to check for proper engagement.
2. Inlet hose to heater core.
3. Inlet hose clamp.
4. Inlet hose mounting screw.
Tighten
-
Screw to 30 Nm (22 lb ft).
5. Engine coolant.
-
Check the system for leaks.
Heater Outlet Hose
Heater Hose Routing
Quick Connect Heater Inlet Connector
Remove or Disconnect
1. Engine coolant.
