C 1500 Truck 2WD V6-4.3L VIN X (2003)
Alignment: Service and Repair
Rear Wheel Alignment
REAR WHEEL ADJUSTMENT
REAR TOE ADJUSTMENT
1. Loosen the jam nut on the tie rod (1).
2. Rotate the inner tie rod to the required toe specification setting. Refer to Wheel Alignment Specifications.
3. Tighten the jam nut on the tie rod.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the tie rod jam to 65 Nm (48 lb ft).
4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.