chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Alignment|Specifications > < Steering/Suspension - Wheel Alignment Specifications|Page 14140
Page 1
background image

Alignment: Technical Service Bulletins
Wheel Alignment - Revised Specifications

File In Section: 03 - Suspension 

Bulletin No.: 03-03-07-001

Date: February, 2003

SERVICE MANUAL UPDATE

Subject: 
Revised Wheel Alignment Specifications

Models: 
2003 Chevrolet Silverado 1500 Series Regular and Extended Cab Models 
2003 GMC Sierra 1500 Series Regular and Extended Cab Models

This bulletin is being issued to revise the Wheel Alignment Specifications in the Wheel Alignment sub-section of the Service Manual. Please replace the
current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin
on the affected page.

Because of a change in tire manufacturers, the caster specification differs for vehicles produced after the specified VIN breakpoints.

These specifications should be used for vehicles built prior to the VIN breakpoints shown.

Vehicles built after the following VIN breakpoints are to be serviced with the new specifications shown in the table shown.

VIN Breakpoints and Dates

-

Ft. Wayne: 1GCEK19T53Z200018 (11/14/02)

-

Oshawa: 2GCEK19TX31211735 (11/12/02)

-

Pontiac: 1GCEK19T63E187691 (11/14/02)

Disclaimer

Alignment|Specifications > < Steering/Suspension - Wheel Alignment Specifications|Page 14140