chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Distributor Removal & Installation|Page 6960 > < Ignition Timing Adjustment|Page 6957
Page 1
background image

Distributor: Service and Repair
Distributor Removal & Installation

Distributor Removal

1. Remove the ignition coil wire harness from the ignition coil and distributor cap.

2. Remove two screws holding the distributor cap to the housing.
3. Distributor cap.
4. Remove the distributor clamp bolt.
5. Remove the distributor and the distributor clamp.

Distributor Removal & Installation|Page 6960 > < Ignition Timing Adjustment|Page 6957