C 1500 Truck 2WD V8-305 5.0L VIN M SFI (1997)
Tool For Removing Center Support Bearing
Tool For Removing Center Support Bearing (Side View)
Tool For Removing Center Support Bearing (Installation View)
Install or Connect
-
New commutator end and/or drive end bearings (12 and 14) to the armature assembly (13) using a tube that bears on the bearing inner race
only. Press on the bearing until the inner race bottoms out against the shoulder on the armature shaft.
Center Support Bearing
If necessary, replace the center support bearing (32) on the driveshaft (31).