C 1500 Truck 2WD V8-350 5.7L VIN K TBI (1995)
Condenser HVAC: Service and Repair
Condenser Assembly
Remove or Disconnect
1. Discharge and recover refrigerant from the system.
2. Grille.
3. Hood primary latch support.
4. Auxiliary cooling fan, if equipped.
5. Refrigerant hose from condenser.
6.Evaporator tube from condenser.
-
Cap or plug all open connections.
7. Bolts (46).
8. Brackets (45).
9. Upper insulators (44).
10. Condenser (32).
-
Bend the left grille support outboard to gain clearance for the condenser removal.
11. Lower insulators (47).
Install or Connect
1. Lower insulators (47).
2. Condenser (32).
3. Upper insulators (44).
4. Brackets (45).
5. Bolts (46). Tighten Bolts (46) to 4.5 Nm (40 lbs. in.).
6. Evaporator tube to condenser.
7. Refrigerant hose to condenser.
8. Auxiliary cooling fan if equipped.
9. Hood primary latch support.
10. Grille assembly.
11. Refrigerant to the system.
-
Check the system for leaks.