C 1500 Truck 2WD V8-454 7.4L (1990)
Universal Joint: All Technical Service Bulletins
Drivetrain - Launch Shudder, Install Additional Mount
Group Ref.: Drive Axle
Bulletin No.: 164101
Date: October, 1993
SUBJECT:
LAUNCH SHUDDER (INSTALL ADDITIONAL MOUNT)
MODELS:
1988-93 CHEVROLET AND GMC K1, 2 EXTENDED CAB WITH 8 FOOT BOX (MODELS K10953, K20953)
THIS BULLETIN IS BEING REVISED TO ADD THE 1993 MODEL YEAR, ADD K2 TRUCKS, AND CHANGE THE CORRECTION, SERVICE
PROCEDURE AND WARRANTY INFORMATION SECTIONS.
PLEASE DISCARD PREVIOUS DIVISIONAL PUBLICATIONS:
CONDITION:
Some owners may comment that their vehicle experiences a launch shudder condition. This condition usually occurs from 0 through about 10 mph and is
usually more noticeable during hard acceleration, when the vehicle is heavily loaded or when towing.
CAUSE:
This condition is caused by the propeller shaft U-joints working at high torque and angle under acceleration and results in a shudder or vibration.
CORRECTION:
This condition may be corrected by installing a mount between the transfer case extension and the torsion bar support crossmember.