C 1500 Truck 2WD V8-5.3L VIN T (1999)
1. Install the lower engine mount to the frame.
2. Install the through bolts.
3. Tighten the through bolts finger tight.
4. Install the upper engine mount and the bolts to the engine.
NOTICE: Refer to Fastener Notice in Service Precautions.
5. Tighten
-
Tighten the bolts to 50 Nm (37 ft. lbs).
6. Remove the engine support and lower the vehicle.
7. Install the three bolts holding the upper and the lower engine mounts together.
8. Tighten
