C 1500 Truck 2WD V8-5.3L VIN T (1999)
4.2.
Tighten intake manifold bolts final pass in sequence to 10 Nm (89 inch lbs.).
5. Install the Manifold Absolute Pressure (MAP) sensor (if previously removed).
The electrical connector end of the sensor should be facing the front of the engine.
6. Install the Positive Crankcase Ventilation (PCV) valve (2) and hose (1).
7. Install the vapor vent pipe hose and clamp onto the throttle body.
8. Install the accelerator control cable bracket (2) and bolts (1) (if applicable).
-
Tighten the throttle cable bracket bolt to 10 Nm (89 inch lbs.).