C 1500 Truck 2WD V8-5.3L VIN T (1999)
4.2.
O-ring seal (4).
4.3.
Servo piston (3).
4.4.
Retainer (2).
4.5.
Piston spring (1).
Installation Procedure
1. Install the following parts: Piston spring (1). Retainer (2). Servo piston (3).
^
O-ring seal (4).
^
Forward servo piston pin (5).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the six forward servo gasket, cover, and six bolts.
^
Tighten the bolts to 24 Nm (18 ft. lbs.).
3. Install the oil pan and filter. Refer to AT Fluid/Filter Changing.
4. Lower the vehicle.