C 1500 Truck 2WD V8-5.3L VIN T (1999)
8. Align the outside diameter of cable (2) with the inside of the diameter of cable (1).
9. Push the end of the shift cable (2) inside the end of shift cable (1) until the blue spring on shift cable (2) is fully compressed. Pushing together the
two ends of the shift cable will engage the inner wire and lock both cable wires together.
10. Release the shift cable end (2) and allow the blue spring to tension/adjust the shift cable system.
Important: This step must be performed correctly to avoid a misadjusted cable.
Do not Grasp the shift cable end (2) during this procedure.
11. Pull the white cover (3) on the shift cable end (1) back.
12. Push the natural colored lock button (2) down to engage the locking teeth on the shift cable end (1).
