C 1500 Truck 2WD V8-5.3L VIN T (1999)
Seals and Gaskets: Service and Repair
NV 4500
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the rear propeller shaft. Refer to Propeller Shaft Replacement (Front Drive) in Propeller Shaft.
3. If the vehicle is equipped with a P model NV4500 transmission, perform the following:
^
Remove the mainshaft nut.
^
Remove the washer.
^
Remove the spline seal.
4. If the vehicle is equipped with a C model NV4500 transmission, perform the following:
^
Remove the mainshaft nut.
^
Remove the washer.
^
Remove the yoke.
5. Remove the rear oil sea[ from the extension housing.
Installation Procedure
