chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Body Hinge Pillar Trim Panel Replacement|Page 15645 > < Body Hinge Pillar Trim Panel Replacement|Page 15643
Page 5
background image

6. Remove the quarter panel trim screws.
7. Pull the panel out. Remove the seat belt assembly. Refer to Rear Seat Belt Retractor Replacement (Extended Cab) Rear Seat Belt Retractor

Replacement (Crew Cab) in Seat Belts.

8. Remove the quarter panel from the vehicle.

Installation Procedure

1. Install the seat belt assembly.
2. Install the quarter panel to the vehicle.

Notice:  Refer to Fastener Notice in Service Precautions.

3. Install the quarter panel trim screws.

Tighten the quarter panel trim screws to 2 N.m (18 lb in).

4. Install the sill trim plates.

5. Install the arm rest.

6. Install the arm rest screw.

Tighten the arm rest screw to 2 N.m (18 lb in).

7. Install the rear window molding.

Body Hinge Pillar Trim Panel Replacement|Page 15645 > < Body Hinge Pillar Trim Panel Replacement|Page 15643