C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
6. Remove the relay from the studs on the engine.
INSTALLATION PROCEDURE
1. Install the relay to the studs on the engine.
2. Install the relay mounting nuts.
Tighten
^
Tighten the nuts to 42 Nm (31 lb. ft.).
3. Install the wiring harness connector to the relay.
4. Install the glow plug wiring harness nuts.
Tighten
^
Tighten the nuts to 5 Nm (44 lb. in.).
5. Install the upper intake manifold cover.
6. Install the negative battery cables.