C 1500 Truck 2WD V8-6.5L DSL Turbo VIN S (1997)
Fuel Injector Line: Service and Repair
Fuel Injector Line Replacement
Injection Line Routing
NOTE: Removing the fuel injection pump and injection lines requires removing the intake manifold.
Clean
-
All line fittings that will be loosened or removed.
REMOVE OR DISCONNECT
1. Negative battery cables,
2. Intake manifold. Refer to Intake Manifold.
NOTE: Before any further service work is to be done, cover the intake ports with J 29664-1.
3. Injection line clips at the loom brackets.
4. Injection lines, at the nozzles.
-
Cap the lines and nozzles immediately.
-
Do not bend injection lines.
5. Injection lines at the pump.
-
Cap the lines and the pump fittings immediately.
-
Tag the lines for installation.
INSTALL OR CONNECT
1. Injection lines at the pump.
-
Uncap the lines and pump fittings.
-
Refer to the tags for correct installation.
2. Injection lines at the nozzles.
-
Uncap the lines and nozzles.
Tighten