C 1500 Truck 2WD V8-6.5L DSL Turbo VIN S (1997)
Rectifier Bridge In End Frame
REMOVE OR DISCONNECT
1. Three rectifier bridge to stator nuts.
2. Stator.
3. One screw from the brush holder and two insulated screws from the regulator connector.
Slip Ring End Frame With Starter Removed
4. Brush holder, regulator, and connector from the end frame.
Rectifier Bridge In End Frame
5. BAT terminal nut from the insulated heat sink.
6. Two screws and washers from the grounded heat sink.