chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Thermostatic Air Cleaner Vacuum Switch|Testing and Inspection|Page 1982 > < Thermostatic Air Cleaner Vacuum Motor|Testing and Inspection|Page 1978
Page 1
background image

Thermostatic Air Cleaner Vacuum Switch: Testing and Inspection

1. With engine temperature below 85° F, tape a thermometer in air cleaner.
2. Install air cleaner cover and start engine.
3. When cold air door starts to open, remove air cleaner cover and check temperature. 

-

If temperature is below approximately 85° F, sensor must be replaced.

NOTE:  If hoses have been removed from connectors for any reason, it is very important that they be correctly positioned for proper operation.

Thermostatic Air Cleaner Vacuum Switch|Testing and Inspection|Page 1982 > < Thermostatic Air Cleaner Vacuum Motor|Testing and Inspection|Page 1978