C 20 3/4 Ton Pickup 2WD V8-379 6.2L DSL VIN C FI (1983)
![background image](/chevrolet/c_20_3/4_ton_pickup_2wd/v8-379_6.2l_dsl_vin_c_fi/Page-1265005.png)
Fig. 11 Gauging seal retainer
9.
Install new sleeve retainer so its flange face will be against front end of sleeve, then using sleeve from tool J-23128 and a mallet, tap sleeve
retainer until outer edge of sleeve retainer is recessed about 1/32 inch from face of compressor neck, Fig. 11.
10.
Install key, hub and drive plate.
11.
Recharge refrigeration system.