C 20 3/4 Ton Pickup 2WD V8-379 6.2L DSL VIN C FI (1983)
![background image](/chevrolet/c_20_3/4_ton_pickup_2wd/v8-379_6.2l_dsl_vin_c_fi/Page-874001.png)
Wheel Bearing: Adjustments
Front
Two Wheel Drive - 2WD
FRONT WHEEL BEARINGS ADJUSTMENT
1.
While rotating wheel forward, torque spindle nut to 12 ft. lbs.
2.
Back off nut until ``just loose'' then hand tighten nut and back it off again until either hole in spindle lines up with hole in nut. Do not back off nut
more than 1/2 flat.
3.
Install new cotter pin. With wheel bearing properly adjusted, there will be .001---.005 inch endplay.
Four Wheel Drive - 4WD
For Front Wheel Bearing Adjustment Procedures on four wheel drive models refer to Locking Hub/Adjustments.