C 20 P/U 2WD V8-305 5.0L (1985)
SLIDING DOOR CENTER TRACK ASSEMBLY
ROLLER BRACKET ASSEMBLY
9.
Loosely install the new center track (P/N 15554723) using the existing fasteners. Reinstall track plug. Install new roller bracket in track. Reinstall
pin in door and roller bracket. Reinstall screws in door lock (See Figure No. 1 and No. 3). Align the door for even gaps in the fore/aft direction
when closed, then slide the track assembly rearward until rollers touch center track flange. Torque center track hardware 10-14 N.m (7-10 ft.lbs.).
SLIDING DOOR CENTER TRACK COVER ASSEMBLY
10.
Reinstall center track cover. Torque the three screws 3-4 N.m (2-3 ft.lbs.) and the nut 10-14 N.m (7-10 ft.lbs.) (See Figure No. 2).