C 2500 Suburban 2WD V8-6.0L VIN U (2002)
Amplifier: Service and Repair
Amplifier Replacement - 2
REMOVAL PROCEDURE
1. Remove the rear quarter panel.
2. Remove the amplifier retaining bolts (2).
3. Disconnect the electrical connector (1).
4. Remove the amplifier from the vehicle.
INSTALLATION PROCEDURE
1. Install the amplifier to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the amplifier retaining bolts (2).
Tighten
Tighten the screws to 9.0 N.m (80 lb in)
3. Connect the electrical connector (1).
4. Install the rear quarter panel.
