C 2500 Suburban 2WD V8-6.0L VIN U (2002)
1. Align the retainers with the holes in the liftgate.
2. Apply pressure to the seat retainers.
3. Install the expanding plastic retainers at the window latch close-out.
Garnish Molding Replacement - Rear Upper (Tahoe / Yukon / Escalade / Suburban)
Garnish Molding Replacement - Rear Upper (Tahoe / Yukon / Escalade / Suburban)
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Use the J 38778 in order to remove the rear upper garnish molding.
Insert the J 38778 and work along the front edge of the trim panel from one end to the other.
2. Remove the rear upper garnish molding from the vehicle.
Installation Procedure
Install the roof rear upper garnish molding to the vehicle until it clicks into place.
Garnish Molding Replacement - Windshield Pillar
Garnish Molding Replacement - Windshield Pillar
Removal Procedure
