C 2500 Suburban 2WD V8-6.0L VIN U (2002)
8. Install the park brake pedal.
9. Adjust the park brake system.
Left Rear (Without RPO NYS)
Park Brake Cable Replacement - Left Rear (without RPO NYS)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Relieve the tension on the park brake cables by loosening the nut at the equalizer.
4. Disconnect the cable at the equalizer.
5. Remove the cable from the mounting bracket by depressing the locking tabs.