C 2500 Suburban 2WD V8-6.0L VIN U (2002)
Parking Brake Pedal: Service and Repair
Park Brake Pedal Assembly Replacement
Park Brake Pedal Assembly Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Relieve the tension from the park brake cables by loosening the nut at the equalizer.
4. Remove the safety stands.
5. Lower the vehicle.
6. Remove the left side hinge pillar panel.
7. Disconnect the park brake warning lamp connection.
8. Remove the MID-Bussed Electrical Center bracket.
9. Disconnect the park brake release cable from the park brake lever.
